The 400 Watt Complete Kit Includes:

• 4 X 100W Solar Panel 
• 1 X 40A MPPT Solar Charge Controller
• 2 X 100Ah LiFePO4 Battery(SE-B100)
• 1 X 2000W 12V Pure Sine Wave Inverter
• 4 X Z Bracket Set
• 3 X Solar Y Branch Connector MMF
• 1 X 20FT 10AWG Solar Panel to Charge Controller Adaptor Kit
• 1 X 10FT 8AWG Battery to Charge Controller Tray Cables
• 2 X 1.5FT 2AWG Copper Battery Interconnect Cable for 5/16 in Lugs
• 1 X 2FT 6AWG ANL Fuse Cable with Double Ring Terminals for 5/16 in Lugs
• 1 X 40A ANL Fuse Set w/ Fuse
• 1 X 30A Solar Connector Waterproof in-line Fuse Holder w/ Fuse
• 2 X 3FT 2/0 Gauge Battery Inverter Cables

4 x 100W Solar Panel 

• Maximum Power(Pmax): 100W
• Maximum Power Voltage(Vmp): 18.6V
• Maximum Power Current(Imp): 5.38A
• Open Circuit Voltage(Voc): 22.8V
• Short Circuit Current(Isc): 5.78A
• Maximum System Voltage(Vmax): 1000VDC
• Weight: 15 lb
• Dimensions: 39.0 x 21.3 x 1.2 inches

1 x 40A MPPT Solar Charge Controller

• System Nominal Voltage: 12/24V Auto
• Max. PV Open Circuit Voltage: 100VOC
• Charging Technology: MPPT
• Max PV Charging Current: 40A
• Max. Recommended PV Input Power: 600 Watt (12V) / 1200 Watt (24V)
  
• Battery Type Preset: Crystal, Gel, AGM, WET, Calcium / LCO, LFP, LTO 
  
• Housing Case Color: Black / Grey
  
• IP Grade: IP43 for Inside PCBA, IP22 for Connection Area
  
• Net Weight: 1.17kg / 2.58lb
  
• Dimensions (L*W*H): 195*142*74 mm / 7.7*5.5*2.9 in

2 x 100Ah Heated LiFePO4 Battery

• Nominal voltage: 12.8V
• Nominal capacity: 100Ah
• Nominal energy: 1280Wh
• Nominal charging voltage: 14.4V
• Maximum charging current: 100A 
• Maximum discharge current: 100A
• Continuous discharge current: 100A
• Size: 10.2 x 6.6 x 8.3 in
• Weight: 24.3 lb

1 x 2000W 12V Pure Sine Wave Inverter

• Rated Voltage: 12V DC
• Continuous Power: 2000W
• Peak Surge: 4000W
• Waveform: Pure Sine Wave
• Input Voltage: 12V DC
• Output Voltage: 120V AC
• Output Frequency: 60 Hz
• Output Efficiency: ＞88%
• AC Output Sockets: 3
• USB Power Port: 5V / 2.1A
• Power Output Control: AC On/off Switch
• Operation Temperature: 14°F to 122°F
• Dimensions: 16.1 x 9.6 x 4.0 in
• Weight: 10.1 lb

3 x Solar Y Branch Connector

• Rated Current: 30A 
• Maximum Voltage: 1000VDC
• Waterproof: IP67 
• Wire Range: 10AWG, 12AWG
• Insulation Material: PPO + PA 
• Contact Material: Tinned Copper
• Temperature Range: 14°F ~ 194°F
• Safety Class: II

1 x 20FT 10AWG Solar Panel to Charge Controller Adaptor Kit

• Length: 20 feet
• AWG: 10
• Rating Voltage: DC: 1.8KV / AC: 0.6~1KV
• Waterproof: IP65
• Fire Rated: IEC60332-1
• Insulation Material: TPE
• Contact Material: Tinned Copper 
• Temperature Range: 14°F ~ 194°F

1 x 10FT 8AWG Battery to Charge Controller Tray Cables

• Length: 10 feet
• AWG: 8 
• Rating Voltage: 600/1000V 
• Temperature: -40°F to +185°F 

2 x 1.5FT 2AWG Copper Battery Interconnect Cable

• Length: 1.5 feet
• AWG: 2
• 100% Pure Copper
• Terminals: 5/16'' Both Ends

1x 2FT 6AWG Copper ANL Fuse Cable

• Length: 2 feet
• AWG: 6
• 100% Pure Copper
• Terminals: 5/16'' Both Ends

1 x 40A ANL Fuse Set w/ Fuse

• Current Rating: 40A
• Voltage Rating: 72V
• Interrupt Capacity: 240A (48V)

1x 30A Solar Connector Waterproof In-line Fuse Holder w/ Fuse

• Rated Current: 30A 
• Degree of Protection: IP2/IP67
• Rated Voltage: 1000 V DC 
• Flame Class: UL94-V0
• Test Voltage: 6000V (50Hz,1 min) 
• Safety Class: II
• Overvoltage Category: CATIII 
• Suitable Connector: Solar Connector
• Contact Resistance of Plug Connector: 1mΩ 
• Insertion Force / Withdrawal Force: ≤50N / ≥50N
• Contact Material: Copper, Silver Plated 
• Insulation Material: PPO 

2 x 3FT 2/0AWG Battery Inverter Cables for 3/8 in Lugs

• Length: 3 feet
• AWG: 2/0
• 100% Pure Copper
• Terminals: 3/8'' Both Ends